Display CaseFHG 2L & FHG 3L
9r3 Operating modeThe controller can work as a thermostat and defrost controller (r3 = 0), or as a simple thermostat in directoperation (r3 = 1), or a
10c11 Delayed compressor delayNot used by FosterDefault: c11 = 4d0 Type of DefrostSets the type of defrost required.Default: d0 = 0. Foster setting d0
11d/1 Display defrost probe.Displays the value measured by the defrost probe.Once d/1 has been selected press the button to display the temperatu
12Default: A6 = 0.A7 External alarm detection delay.Not used by fosterDefault: A7 = 0.A8 Enables alarm ‘Ed1’ and ‘Ed2’.Not used by Foster.Default: A8
13Default: H3 = 0.H4 Disable buzzer.H4 = 0 buzzer enabled. H4 = 1 buzzer disabled.Default: H4 = 0.H5 Function of relay 5.Not used by Foster.Default: H
14MCB Siemens 5SY6316 –8 TP 16 Amp 3 Pole 16240209X XWiring diagramsThe drawings numbers for the display cases are as follows:FHG2L - 2 door unit s
15
FHG2L - 2 door unit single phase 00-233867-02
FHG2L - 2 door unit three phase 00-233868-02
1FHG3L - 3 door unit three phase 00-233869-02
1Foster Refrigerator Environmental Management Policy Product Support and Installation ContractorsFoster Refrigerator recognises that its activities, p
Foster European OperationsFranceFoster Refrigerator France SATel: (33) 01 34 30 22 22. Fax: (33) 01 30 37 68 74. Email: [email protected]
2IntroductionThe display case are manufactured in two formats FHG 2L, 2 doors, and the FHG 3L, three doors.There are also Multiplex options that are a
3Temperature controllerIt is strongly advised that before adjusting any Service Parameters a thorough understanding of thefollowing instructions shoul
49. Compressor: Illuminated when the compressor is running. Flashes when the activation of the compressoris delayed by safety times.10. FAN: Illumina
53. Confirm by pressing .4. The display shows the code of the first modifiable type “C” parameter.Modifying the parameters.After having accesse
6Classification of ParametersThe parameters, as well as being divided into type, are also grouped into logical categories identified by the initiallet
735 c9 Enable autostart with PD operation flag 0 0 036 c10 Select Pd by time or pressure flag 0 0 037 c11 Delayed compressor delay sec 4 4 438 d0 Type
8Parameter Definitions/2 Measurement stability.Defines the coefficient used to stabilise the temperature reading./3 Probe display rateSets the rate at
Comments to this Manuals