Foster 7368 030 Installation Manual

16 INSTRUCTION OF USE NOTICE D’UTILISATION

25 Automatic cooking re-press on display “SLIDER“ [ 9 ] [ 9 ] is blinking with [ A ] Power level selection slide on the “SLIDER“ to [ 7 ]

26 The maximum duration of keeping warm is 2 hours.

27 Control panel locking To avoid modifying a setting of the cooking zones, in particular during cleaning, or to avoid children accidentally turning

28 If the bottom of the pan (Ød) is significantly smaller than the diemeter of the body (ØD) the performance will not

29 Pan dimension The cooking zones will, to a certain limit, automatically adapt to the diameter of the pan. However the bottom of this pan must h

30 WHAT TO DO IN CASE OF A PROBLEM The hob or the cooking zone doesn’t start-up : • The hob could badly connected on the electrical network. Check

31 cord and remove it together with the plug. This machine has been accorded the appropriate mark in accordance with European Directive 2002/96EG re

32 • The safety gap between the hob and the cooker hood placed above must respect the indications of the hood manufacturer. In case of absence of i

Dear clients, Thank you for having chosen our induction ceramic hob. In order to make the best use of your appliance, we would advise you to read c

18 SAFETY Precautions before using • Unpack all the materials. • The installation and connecting of the appliance have to be done by approved spec

19 Precautions not to damage the appliance • Raw or damaged pot or pan bottoms (not enamelled cast iron pots,) may damage the ceramic glass. • Sa

20 DESCRIPTION OF THE APPLIANCE Technical characteristics Total Power Diameter Nominal Power* Booster Power* Minimum diameter detection Max 7400

21 USE OF THE APPLIANCE Display Display Designation Function 0 Zero The heating zone is activated. 1…9 Power level Sel

22 Sensitive touch Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger presses the key, the correspond

23 Pan detection The pan detection ensures a perfect safety. The induction doesn’t work: • If there is no pan on the heating zone or if this pan is

24 Action Control panel Display Zone selection press display [ 0 ] selected [ 0 ] and control light on Select the power level